Brother MFC-J460DW User Manual

Home > Fax > Receive a Fax > Remote Fax Retrieval > Use Your Remote Access Code
Use Your Remote Access Code
Related Models: MFC-J680DW/MFC-J880DW/MFC-J885DW
1. When away from your Brother machine, dial your fax number from a touch-tone telephone or fax machine.
2. When your machine answers, immediately enter your three-digit Remote Access Code, followed by *.
3. Your Brother machine signals if it has received faxes:
• One long beep - the machine received at least one fax
• No beeps - the machine has not received a fax
4. When the machine gives two short beeps, enter a command.
• The machine will hang up if you wait longer than 30 seconds to enter a command.
• The machine will beep three times if you enter an invalid command.
5. When finished, press 9, and then press 0 to deactivate your machine.
6. Hang up.
• If your machine is set to [Manual] mode and you are using Remote Retrieval, wait for about 100
seconds after your fax number starts ringing, and enter your Remote Access Code within 30 seconds.
• This feature may not be available in some countries or supported by your local telephone company.
Related Information
• Remote Fax Retrieval
• Set a Remote Access Code
266

Brother MFC-J460DW Specifications

General

Print Technology	Inkjet
Max Print Resolution	6000 x 1200 dpi
Max Print Speed (Black)	12 ppm
Max Print Speed (Color)	10 ppm
Automatic Document Feeder	Yes
Duplex Printing	Yes
Paper Input Capacity	100 sheets
Functions	Print, Copy, Scan, Fax
Memory	128 MB
Fax Speed	14.4 kbps
Display	1.8" color LCD
Connectivity	USB
Scanner Type	Flatbed, ADF
Max Scan Resolution	1200 x 2400 dpi
Mobile Printing	Yes
Ink Cartridges	Black, Cyan, Magenta, Yellow