Brother MFC-J460DW

Home > Fax > Receive a Fax > Fax Polling > Polling Receive > Setup for Polling Receive
Setup for Polling Receive
Related Models: MFC-J680DW/MFC-J880DW/MFC-J885DW
1. Press [Fax].
(MFC-J880DW/MFC-J885DW)
If [Fax Preview] is set to [On], press [Fax] > [Sending Faxes].
2. Press [Options] > [Polling RX].
3. Press [On] (or [Off]).
4. Enter the fax number you are polling using the Address Book or keyboard.
5. Press [Fax Start].
Related Information
• Polling Receive
272