Home > Machine Settings > Change Machine Settings from the Control Panel > Save Your Favorite
Settings as a Shortcut > Add Shortcuts
Add Shortcuts
Related Models: MFC-J680DW/MFC-J880DW/MFC-J885DW
You can add the fax, copy, scan and Web Connect settings you use most frequently by saving them as your
Shortcuts. Later you can recall and apply these settings instead of re-entering them.
Some Shortcut menus are not available depending on your model.
These instructions describe how to add a Copy Shortcut. The steps for adding a Fax, Scan, or Web Connect
shortcut are very similar.
1. Press [Shortcuts].
2. Press
where you have not added a Shortcut.
3. Press a or b to display [Copy].
4. Press [Copy].
5. Read the information on the Touchscreen, and then confirm it by pressing [OK].
6. Press a or b to display the available settings, and then press the setting you want to change.
7. Press a or b to display the available options for the setting, and then press the option you want.
Repeat the previous and this steps until you have selected all the settings for this Shortcut.
8. When you are finished changing the settings, press [Save as Shortcut].
9. Read and confirm the displayed list of settings you have selected, and then press [OK].
10. Enter a name for the Shortcut using the Touchscreen.
Press [OK].
11. Press [OK] to save your Shortcut.
Related Information
• Save Your Favorite Settings as a Shortcut
567
To Next Page
Loading...
Need help?
General
