Brother MFC-J460DW

Level 1 Level 2 Level 3 Descriptions
Setup Receive
Remote Codes
- Answer calls at an extension or external telephone
and use codes to turn the machine on or off. You
can personalize the codes.
Auto Reduction
- Reduce the size of incoming faxes.
Memory Receive
- Set the machine to send faxes to your computer.
If you select PC-Fax Receive, you can turn on the
Backup Print safety feature.
Fax Rx Stamp
- Print the received time and date on the top of the
received faxes.
Setup
AddressBook
Set Speed Dial
- Store Speed Dial numbers, so you can dial by
pressing only a few buttons.
Setup Groups
- Set up Group numbers for broadcasting.
Report Setting Transmission
- Select the initial setup for the Transmission
Verification Report.
Journal Period
- Set the interval for automatic printing of the Fax
Journal.
If you select other than Off and Every 50 Faxes,
you can set the time for the option.
If you select Every 7 Days, you can set the day of
the week.
Print Fax
- - Print received faxes stored in the memory.
Remaining Jobs
- - Check which scheduled jobs are in the memory
and cancel selected jobs.
Miscellaneous TX Lock
- Prohibit most functions except receiving faxes.
Distinctive
(USA and Canada
only)
Distinctive
Turn on the telephone company's Distinctive Ring
subscriber service to register your new ring pattern
on the machine.
Ring Pattern
Caller ID
(USA only)
Area Code
Set your 3-digit area code only if you do not dial it
within your own area code.
Settings > [Network]
Level 1
Level 2 Level 3 Descriptions
WLAN TCP/IP BOOT Method
Select the BOOT method that best suits your needs.
IP Address
Enter the IP address.
Subnet Mask
Enter the Subnet mask.
Gateway
Enter the Gateway address.
Node Name
Enter the Node name.
WINS Config
Select the WINS configuration mode.
WINS Server
Specify the IP address of the primary or secondary
WINS server.
DNS Server
Specify the IP address of the primary or secondary
DNS server.
APIPA
Set the machine to allocate the IP address from the
link-local address range automatically.
IPv6
Turn the IPv6 protocol on or off for a wireless LAN. To
use the IPv6 protocol, go to the Brother Solutions
Center at http://support.brother.com for more
information.
574