Brother MFC-J5330DW Service Manual

Confidential
9.42 Switchback Sensor PCB......................................................................................3-96
9.43 CR Encoder Strip...............................................................................................3-101
9.44 Carriage Motor...................................................................................................3-102
9.45 Flushing Base....................................................................................................3-105
9.46 LT Frame ASSY ................................................................................................3-106
9.47 T2 Bank ASSY...................................................................................................3-109
9.48 Power Supply PCB ASSY .................................................................................3-110
9.49 Switchback Roller..............................................................................................3-112
9.50 PF Encoder Disk................................................................................................3-113
9.51 PF Encoder Sensor PCB...................................................................................3-114
9.52 Paper Feed Motor..............................................................................................3-116
9.53 Paper Feed Roller .............................................................................................3-118
9.54 Maintenance Unit...............................................................................................3-119
9.55 Ink Absorber Felt (For Maintenance Unit) .........................................................3-121
9.56 Platen/Paper Ejection Roller..............................................................................3-122
9.57 Registration Sensor PCB...................................................................................3-125
9.58 Flushing Box......................................................................................................3-128
9.59 Paper Feed Arm Frame ASSY..........................................................................3-128
9.60 T1 Bank ASSY...................................................................................................3-129
9.61 T1 Base Pad / T2 Base Pad..............................................................................3-131
CHAPTER 4 ADJUSTMENTS AND UPDATING OF SETTINGS,
REQUIRED AFTER PARTS REPLACEMENT..............................................4-1
1 IF YOU REPLACE THE MAIN PCB...............................................................................4-1
1.1 Customize destinations (Maintenance mode 74) ..................................................4-3
1.2 Set the CIS type (Maintenance mode 59) .............................................................4-3
1.3 Install the firmware (Maintenance mode 28) .........................................................4-3
1.4 Initialize the EEPROM parameters (Maintenance mode 01).................................4-5
1.5 Restore the head calibration data (Maintenance mode 68)...................................4-5
1.6 Set the serial number (Maintenance mode 80) .....................................................4-5
1.7 Updating of head property data (Maintenance mode 68)......................................4-6
1.8 Restore machine information (Maintenance mode 46)..........................................4-6
1.9 Adjust the touch panel (Maintenance mode 78)....................................................4-7
1.10 Acquire white/black level data (Maintenance mode 55)........................................4-7
1.11 Adjustment of software correction for inclination/corrugation/ruled lines
(Maintenance mode 65).........................................................................................4-7
1.12 Updating of paper feeding correction values (Maintenance mode 58)..................4-7
1.13 Adjustment of margins in borderless printing (Maintenance mode 66) .................4-7
1.14 Reset purge and flushing counts...........................................................................4-7

Brother MFC-J5330DW Specifications

General

Type	all in one, fax
Color	black
Touch Screen	yes
Display Size	2.7 inches
Tray Capacity	250
Output Tray Capacity	100
Automatic Document Feeder Capacity	50 sheets
Paper Size	letter, executive, envelope (com-10, dl envelope, monarch), a4, a5, a6 photo 4"x6", 3.5"x5", 5"x7", 5"x8", manual by-pass: 3.5" x 5" to 11" x 17"
Printing Method	color
Color Print Speed	20 pages per minute
Mono Print Speed	22 pages per minute
Print Resolution Mono	up to 4800 x 1200
Print Resolution Color	up to 4800 x 1200
Media Types	glossy paper, inkjet paper (coated paper), plain paper, recycled paper
Two-Sided Printing	no
Maximum Number of Pages Per Month	up to 30, 000
Reduction and Enlargement	yes
Photo Printing	yes
Scanner Type	flatbed
Scan Resolution	up to 2400 x 2400
Duplex Scan	yes
Copier Resolution Mono	up to 4800 x 1200
Copier Resolution Color	up to 4800 x 1200
Fax Function	yes
Cartridges	lc3019bk/c/m/y inkvestment super high-yield cartridges, lc3017bk/c/m/y inkvestment super high-yield cartridges
Number Of Cartridges	4
Number of Ink Tanks	0
Internal Memory	yes
Memory Card	no
Network	wired, wireless
Connectivity	apple airprint, brother iprint&scan, google cloud print, mopria print service, usb, wi-fi, wi-fi direct
OS Compatibility	windows vista, 7, 8, 8.1, 10 home, 10 pro, 10 education, 10 enterprise, os x v10.9.5, os x v10.10.x, os x v10.11.x, hard disk space for drivers and apps
Mobile Devices Connection	yes

Weight and Dimensions

Depth	12 inches
Height	12 inches
Width	20.9 inches
Net Weight	36.8 pounds