Brother MFC MFC-7320 User Manual

Troubleshooting and routine maintenance
101
B
Setting dial tone detection B
When you send a fax automatically, by
default your machine will wait for a fixed
amount of time before it starts to dial the
number. By changing the Dial Tone setting to
Detection you can make your machine dial
as soon as it detects a dial tone. This setting
can save a small amount of time when
sending a fax to many different numbers. If
you change the setting and start having
problems with dialling you should change
back to the default No Detection setting.
a Press Menu, 0, 5.
b Press a or b to choose Detection or
No Detection.
Press OK.
c Press Stop/Exit.
Curled
 Choose Reduce Paper Curl mode in the printer driver when you do
not use our recommended paper. (See Device Options (For
Windows
®
) or Print Settings (For Macintosh
®
) in the Software User's
Guide on the CD-ROM.)
 Turn the paper over in the paper tray, and print again. (Excluding
Letterhead paper)
 Lift up the output tray support flap.
 Replace the paper in the paper tray with paper from a freshly opened
ream.
 Make sure you are using paper that is recommended for your
machine. (See Acceptable paper and other print media on page 14.)
Examples of poor print
quality
Recommendation

Brother MFC MFC-7320 Specifications

General

Print Technology	Laser
Print Resolution	Up to 2400 x 600 dpi
Copy Resolution	Up to 600 x 300 dpi
Optical Resolution	600 x 2400 dpi
Paper Input Capacity	250 sheets
Output Tray Capacity	100 sheets
Connectivity	USB 2.0
Functions	Copier, Fax, Printer, Scanner
Fax Resolution	300 x 300 dpi
Scan Type	Flatbed
Media Type	Plain paper, envelopes, labels
Media Size	A4, A5, B5, Legal, Letter, Executive
Display	LCD (2-line)
Print Speed	Up to 20 ppm
Copy Speed	Up to 20 cpm