Brother MFC MFC-7320

Security features
27
4
Turning Secure Function Lock on/off 4
If you enter the wrong password when
following the instructions below, the LCD will
show Wrong Password. Re-enter the
correct password.
Turning Secure Function Lock on 4
a Press Menu, 1, 8, 1.
b Press a or b to choose Lock OffiOn.
Press OK.
c Enter your four-digit administrator
password.
Press OK.
Turning Secure Function Lock off 4
a Press Menu, 1, 8, 1.
b Press a or b to choose Lock OniOff.
Press OK.
c Enter your four-digit administrator
password.
Press OK.
Switching Users 4
This setting allows a restricted user to log on
the machine when Secure Function Lock is
turned on.
Note
After a restricted user has finished using
the machine, it will return to the Public
setting within the same time as the Mode
Timer setting (Menu, 1,1). (See Mode
timer on page 21. Also, you can exit from
an individual user by pressing the lighted
Mode key.)
a Hold down Shift as you press Secure.
Change User
PIN:XXXX
b Enter your four-digit password.
Press OK.
When Copy mode is disabled:
a Press Copy key.
Access Denied
b Enter your four-digit password.
Press OK.
When Scan mode is disabled:
a Press Scan key.
Access Denied
b Enter your four-digit password.
Press OK.