Brother MFC MFC-7320 User Manual

Making copies
73
12
Repeat h and i for each page of the
layout.
j After all the pages have been scanned,
press 2 in h to finish.
If you are copying from the ADF: 12
Insert your document face up in the direction
shown below:
 2 in 1 (P)
 2 in 1 (L)
 4 in 1 (P)
 4 in 1 (L)
If you are copying from the scanner
glass:
12
Insert your document face down in the
direction shown below:
 2 in 1 (P)
 2 in 1 (L)
 4 in 1 (P)
 4 in 1 (L)
Out of memory
message
12
If the memory becomes full while you are
making copies, the LCD message will guide
you through the next step.
If you get an Out of Memory message
while scanning a subsequent page, you will
have the option to press Start to copy the
pages scanned so far, or to press Stop/Exit
to cancel the operation.
To gain extra memory, you can do the
following:
 Print the faxes that are in the memory.
(See Printing a fax from the memory
on page 43.)
 You can turn off Fax Storage. (See
Turning off remote fax options
on page 58.)
Note
When you get an Out of Memory
message, you may be able to make
copies if you first print incoming faxes in
the memory to restore the memory to
100%.

Brother MFC MFC-7320 Specifications

General

Print Technology	Laser
Print Resolution	Up to 2400 x 600 dpi
Copy Resolution	Up to 600 x 300 dpi
Optical Resolution	600 x 2400 dpi
Paper Input Capacity	250 sheets
Output Tray Capacity	100 sheets
Connectivity	USB 2.0
Functions	Copier, Fax, Printer, Scanner
Fax Resolution	300 x 300 dpi
Scan Type	Flatbed
Media Type	Plain paper, envelopes, labels
Media Size	A4, A5, B5, Legal, Letter, Executive
Display	LCD (2-line)
Print Speed	Up to 20 ppm
Copy Speed	Up to 20 cpm