Telephone and external devices
45
7
c Press Start.
d After printing has finished,
press Stop/Exit.
Setting the telephone line
type 7
If you are connecting the machine to a line
that features a PBX or ISDN to send and
receive faxes, it is necessary to change the
Telephone Line Type accordingly by
completing the following steps. If you are
using a line that features a PBX, you can set
your machine to always gain access to an
outside line, or not.
a Press Menu, 0, 6.
b Press a or b to choose PBX, ISDN (or
Normal).
Press OK.
c Do one of the following:
If you chose ISDN or Normal, go to
g.
If you chose PBX, go to d
d Do one of the following:
If you want to change the current
prefix number, press 1 and go to e.
If you do not want to change the
current prefix number, press 2 and
go to g.
e Enter the prefix number (up to 5 digits)
on the dial pad.
Press OK.
• You can use the numbers 0 to 9, #, l and !.
(Press Tel/R to display “!”.)
You cannot use ! with any other numbers
or characters.
If your telephone system requires a timed
break recall, press Tel/R to enter the
break.
• If the pulse dialling mode is on, # and l are
not available to use.
f Press a or b to choose On or Always.
Press OK.
• If you choose On, pressing Tel/R (the
screen displays “!”.) will let you access an
outside line.
• If you choose Always, you can access an
outside line without pressing Tel/R.
g Press Stop/Exit.
PBX and TRANSFER 7
The machine is initially set to Normal, which
lets the machine connect to a standard PSTN
(Public Switched Telephone Network) line.
However, many offices use a central
telephone system or Private Branch
Exchange (PBX). Your machine can be
connected to most types of PBX. The
machine’s recall feature supports timed break
recall only (TBR). TBR will work with most
PBX systems allowing you to gain access to
an outside line, or transfer calls to another
extension. The feature works when Tel/R is
pressed.
To Next Page
Loading...
Need help?
General
