Brother MFC MFC-7320 User Manual

118
d Put the drum unit and toner cartridge
assembly back in the machine.
e Close the front cover.
f Plug the machine’s power cord back into
the electrical socket first, and then plug
in the telephone line cord.
Turn on the machine.
Cleaning the corona wire B
If you have print quality problems, clean the
corona wire as follows:
a Turn off the machine. Unplug the
telephone line cord first, disconnect all
cables, and then unplug the power cord
from the electrical socket.
b Open the front cover.
c Slowly take out the drum unit and toner
cartridge assembly.
CAUTION
We recommend that you place the drum
unit and toner cartridge assembly on a
clean, flat surface with a sheet of
disposable paper or cloth underneath it in
case you accidentally spill or scatter toner.
Handle the toner cartridge carefully. If toner
scatters on your hands or clothes, wipe or
wash it off with cold water at once.
To prevent damage to the machine caused
by static electricity, DO NOT touch the
electrodes shown in the illustration.

Brother MFC MFC-7320 Specifications

General

Print Technology	Laser
Print Resolution	Up to 2400 x 600 dpi
Copy Resolution	Up to 600 x 300 dpi
Optical Resolution	600 x 2400 dpi
Paper Input Capacity	250 sheets
Output Tray Capacity	100 sheets
Connectivity	USB 2.0
Functions	Copier, Fax, Printer, Scanner
Fax Resolution	300 x 300 dpi
Scan Type	Flatbed
Media Type	Plain paper, envelopes, labels
Media Size	A4, A5, B5, Legal, Letter, Executive
Display	LCD (2-line)
Print Speed	Up to 20 ppm
Copy Speed	Up to 20 cpm