Brother MFC MFC-7320 User Manual

Chapter 2
12
c Using both hands, slide the manual feed
slot paper guides to the width of the
paper that you are going to use.
d Using both hands, put one sheet of
paper or one envelope in the manual
feed slot until the front edge of the paper
or envelope touches the paper feed
roller. When you feel the machine pull in
the paper, let go.
Note
• Put the paper into the manual feed slot
with the side to be printed face up.
• Make sure that the paper or print media
(see Acceptable paper and other print
media on page 14.) is straight and in the
correct position on the manual feed slot. If
it is not, the paper or the transparency
may not be fed correctly, resulting in a
skewed printout or a paper jam.
• Do not put more than one sheet of paper
in the manual feed slot at any one time, as
it may cause a jam.
• If you put any print media in the manual
feed slot before the machine is in the
Ready state, the print media may be
ejected without being printed on.
• To easily remove a small printout from the
output tray, lift up the scanner cover by
using both hands as shown in the
illustration.
• You can still use the machine while the
scanner cover is up. To close the scanner
cover, push it down with both hands.

Brother MFC MFC-7320 Specifications

General

Print Technology	Laser
Print Resolution	Up to 2400 x 600 dpi
Copy Resolution	Up to 600 x 300 dpi
Optical Resolution	600 x 2400 dpi
Paper Input Capacity	250 sheets
Output Tray Capacity	100 sheets
Connectivity	USB 2.0
Functions	Copier, Fax, Printer, Scanner
Fax Resolution	300 x 300 dpi
Scan Type	Flatbed
Media Type	Plain paper, envelopes, labels
Media Size	A4, A5, B5, Legal, Letter, Executive
Display	LCD (2-line)
Print Speed	Up to 20 ppm
Copy Speed	Up to 20 cpm