164
■ Repeating one element of a repeated
pattern
By using the Cut function, you can select one
element of a repeated pattern and repeat only that
single element. This function allows you to design
complex repeated patterns.
a
Choose the direction in which the repeated
pattern will be cut.
• Touch to cut horizontally.
• Touch to cut vertically.
The pattern direction indicator will change
depending on the direction selected.
b
Use and to select the cut line.
The cut line will move.
c
Touch .
The repeated pattern will be divided into separate
elements.
d
Touch .
e
Use and to select the element to
repeat.
f
Repeat the selected element.
To Next Page