206
Setting up the optional bobbin
winder
Attach the spool pin, spool cushion and thread
guide to the bobbin winder.
a
Insert the spool pin and the spool cushion.
Lower the holder, and then insert the spool pin straight
into the hole. And insert the spool cushion.
1 Spool pin
2 Spool pin holder
3 Hole for spool pin
4 Spool cushion
b
Insert the thread guide.
Insert the thread guide straight into the hole with the
pins on the thread guide aligned with the notches on
the sides of the hole.
1 Pins on thread guide
2 Notches on hole for thread guide
3 Hole for thread guide
• Firmly insert the thread guide as far as possible and
make sure that it is secure.
Connecting the AC adapter
a
Insert the plug of the power supply cord
into the AC adapter.
b
Plug the cord on the AC adapter into the
DC input connector of the bobbin winder,
and then insert the plug of the power supply
cord into a household electrical outlet.
• Be sure to firmly insert the plug on the AC adapter
into the DC input connector of the bobbin winder.
• Be sure to use the included power cord. Using
any other power cord may result in damage.
• Be sure to use the included AC adapter. Using
any other AC adapter may result in damage.
• Before connecting or disconnecting the AC
adapter, be sure that the unit is not operating.
• After using the bobbin winder, disconnect it
from the electrical outlet.
To Next Page