BRP Evinrude E-Tec E115DPLSUC User Manual

298
MIDSECTION
EXHAUST RELIEF MUFFLER ASSEMBLY
EXHAUST RELIEF
MUFFLER ASSEMBLY
The exhaust relief muffler is located at the rear of
the powerhead and concealed by the lower motor
covers. The exhaust relief grommet connects
directly to the muffler assembly.
The muffler assembly connects to the exhaust
relief hoses at the base of the powerhead.
The overboard indicator and flush port in the
exhaust relief grommet connect to the vapor sepa-
rator with a hose. This hose is not connected to
the muffler assembly.
Periodically inspect hoses and connections for
condition. Replace muffler or hoses as needed.
1. Exhaust relief grommet 005220
1. Exhaust relief hoses 005221
1
1
1. Overboard indicator hose 005222
1

BRP Evinrude E-Tec E115DPLSUC Specifications

General

Model	E115DPLSUC
Engine Type	2-Stroke
Cylinders	3
Starting System	Electric
Recommended Fuel	87 Octane
Steering	Remote
Oil Injection	Yes
Exhaust	Through Prop
Horsepower	115 hp
Fuel System	Direct Fuel Injection
Shaft Length	20 in. (508 mm)
Displacement	1727 cc
Weight	181 kg (399 lbs)
Alternator Output	12V - 50A