EasyManuals Logo

BRP Evinrude E-Tec E115DPLSUC User Manual

BRP Evinrude E-Tec E115DPLSUC
443 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #413 background imageLoading...
Page #413 background image
S–21
SAFETY
Handling Lead/Acid Batteries
Charging lead acid batteries
Battery gas is explosive!
Strong acid solution
(sulfuric acid)
If
so
l
u
ti
on ge
t
s
i
n
t
o eyes, was
h
and contact a doctor immediately.
If spilled or
splashed on an
y
part of body...
Wash with
lots of water.
1) Attach and remove these cables with
charger UNPLUGGED from 110 V wall
socket. (This prevents shocks if charger
is defective.)
2) Observe correct polarity when
connecting these larger leads.
3) Always charge in a well ventilated
area. Charging causes acid solution to
give off hydrogen gas through the vents
in the caps. Make sure vents are open.
If clogged, pressure inside may build.
Battery may EXPLODE.
While charging or discharging,
remember:
• No smoking
• No flames
• No sparks
DO NOT check battery charge by
placing metal objects across
posts. You will make sparks and
serious burns are possible.
Never remove charger cables
from battery posts. It is a sure
way to make a lot of sparks in an
area surrounded by battery gas.
After charging:
• Shut off charger
• Pull charger plug out of 110 V
outlet
• Take charger cables off battery
posts

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BRP Evinrude E-Tec E115DPLSUC and is the answer not in the manual?

BRP Evinrude E-Tec E115DPLSUC Specifications

General IconGeneral
BrandBRP
ModelEvinrude E-Tec E115DPLSUC
CategoryOutboard Motor
LanguageEnglish

Related product manuals