BRP ROTAX 912 Series - Overflow Bottle; Accessories (Including Radiator, Radiator Hoses, Hose Clamps, Cooling Air Ducts)

BRP-Rotax
MAINTENANCE MANUAL LINE
OVERFLOW BOTTLE
General note
Figure 7.14: Overflow bottle
1
Venting bore
2
Tab for the safety wire
3 Hose connection
Instruction Checking overflow bottle.
Step
Procedure
1
Inspect the bottle for damage.
2
Check the venting bore (1) in the screw cap.
3 Inspect tab (2) for the safety wire.
4
Check hose connection (3).
ACCESSORIES (INCLUDING RADIATOR, RADIATOR HOSES, HOSE CLAMPS,
COOLING AIR DUCTS)
General note Accessories (including radiator, radiator hoses, hose clamps, cooling air ducts)
ATTENTION
Equipment is to be inspected in accordance with the Maintenance Manual of the
aircraft manufacturer.
12–20–00
Page 24
January 01 2020
Effectivity: 912 Series
Rev. 0