BRP ROTAX 912 Series - Exceeding of Max. Cooling System Temperature

BRP-Rotax
MAINTENANCE MANUAL LINE
EXCEEDING OF MAX. COOLING SYSTEM TEMPERATURE
General note See SB-912-068, latest issue.
ATTENTION
If the maximum cooling system temperature is exceeded, other limits are also
often exceeded, e.g. oil temperature. Please observe the relevant instructions.
NOTE
Any exceeding of the max. admissible cooling system temperature must be en-
tered by the pilot into the engine log book, stating duration, extent of excess tem-
perature and pertinent detail.
Exceeding of max. cylinder head temperature
All engines affected with serial number without Suffix –01.
10054
Proceed as instructed
in table 2
0
30 min. Time
180°C
(356°F)
Operating limit
(See Operators Manual 912 Series)
Proceed as
instructed in table 1
Figure 5.12: Overview and proceed:
05–50–00
Page 20
January 01 2020
Effectivity: 912 Series
Rev. 0