BRP ROTAX 912 Series - Replacing the Dry Air Filter

BRP-Rotax
MAINTENANCE MANUAL LINE
REPLACING THE DRY AIR FILTER
General note Only use dry type air filters which are specified by the aircraft manufacturer and from
ROTAX®.
Figure 7.10: Air filter
1 Air filter 2
Safety wire
3 Carburetor
ATTENTION
Each air filter must be secured by clamp attachment and a wire securing element.
See chapt. 05-00-00 section: Acceptable methods, techniques and practice.Filter
connection must be free of oil.
ATTENTION
Attach new air filter, free of grease, at connection faces, and wire-secure against
loss.
12–20–00
Page 18
January 01 2020
Effectivity: 912 Series
Rev. 0