BRP ROTAX 912 Series - Installation of the Magnetic Plug

BRP-Rotax
MAINTENANCE MANUAL LINE
Figure 7.30: Magnetic plug
INSTALLATION OF THE MAGNETIC PLUG
Install The following steps are necessary:
Step
Procedure
1
Clean the magnetic plug.
2
Install the magnetic plug. Tightening torque 25 Nm (18 ft lb.)
3 Secure with safety wire.
Inspect all systems for correct function. Detailed inspection of affected engine
components.
12–20–00
Page 54
January 01 2020
Effectivity: 912 Series
Rev. 0