BRP-Rotax
MAINTENANCE MANUAL LINE
ATTENTION
Only use brand name oil in accordance with the latest Operators Manual and the
latest Service Instruction “Selection of suitable operating fluids“ of the respec-
tive engine type.
ATTENTION
The engine must not be cranked when the oil system is open. Attention must also
be paid to this before first commissioning (e.g. when assembling the propeller
after correct purging of the oil system).
ATTENTION
DO NOT use compressed air to blow through the oil system (or oil lines, oil cool-
er, oil pump housing, oil bores in the engine).
ENVIRONMENTAL NOTE
Protect the environment.
Do not harm the environment by spilling oil. Dispose of oil in an environmentally friendly
manner.
Step
Procedure
6
Install new oil filter.
7
Pour in approx. 3 l (0.8 gal (US)) of fresh oil.
8 After carrying out the oil change, the engine should be slowly cranked by
hand in the direction of engine rotation (approx. 20 turns) to completely refill
the entire oil circuit.
OIL FILTER REPLACEMENT
General note
m WARNING
Risk of burns and scalds. Hot engine parts.
Always allow engine to cool down to ambient temperature before starting work.
Effectivity: 912 Series
Rev. 0
12–20–00
Page 43
January 01 2020
To Next Page
Loading...
Need help?
General
