BRP ROTAX 912 Series User Manual

BRP-Rotax
MAINTENANCE MANUAL LINE
MAINTENANCE SCHEDULE PROCEDURES
(MAINTENANCE CHECK LIST)
Inspections All stated checks are visual inspections for damage and wear, unless otherwise stated.
Specified period All listed work must be carried out within the specified period.
Maintenance
check lists
Checks are carried out as per the maintenance check lists, where type and volume of
maintenance work is outlined in key words.
• The lists must be photocopied and filled out for each maintenance check.
Extra inspections • The respective check (e.g. 100 hr. check) must be noted on the top of each page of the
maintenance check list.
• All the maintenance work carried out must be initialled in the "signature" area by the air-
craft mechanic performing the task.
Maintenance
records
After maintenance, the completed check lists must be entered in the maintenance records.
The maintenance must be confirmed in the log book.
Discrepancies/re-
medial action
All discrepancies and remedial action must be recorded in a report of findings to be gener-
ated and maintained by the company authorized to carry out maintenance work. It is the
responsibility of the aircraft operator to store and keep the records.
Replacement of
equipment
Replacement of equipment (e.g. fuel pump, governor....) and execution of SB (AD) must
be entered in the engine log book, stating S/N, TSN and date.
05–20–00
Page 6
January 01 2020
Effectivity: 912 Series
Rev. 0

BRP ROTAX 912 Series Specifications

General

Brand	BRP
Model	ROTAX 912 Series
Category	Engine
Language	English