BRP ROTAX 912 Series User Manual

BRP-Rotax
MAINTENANCE MANUAL LINE
GENERAL
In this Manual all ROTAX® 912 Series engines are described.
NOTE
ROTAX® 912 Series includes 912 A, 912 F, 912 S, 912 UL, 912 ULS and 912
ULSFR.
Purpose The purpose of this Manual is to provide aircraft manufacturers with technical require-
ments (e.g. interface descriptions and limitations) that must be adhered to when installing
this type of engine into an aircraft or certifying aircraft powered by this engine type. Fur-
thermore it should allow independent ROTAX® Maintenance Technicians (iRMT) to main-
tain this engine in compliance with the relevant maintenance and safety instructions
provided by the engine manufacturer.
For detailed information related to aircraft and aircraft/engine installation, maintenance,
safety or flight operation, consult the documentation provided by the aircraft manufacturer
and/or its dealer.
For additional information on engines, their maintenance or parts, you can also contact
your nearest authorized ROTAX® authorized Aircraft Engine Distributor or their independ-
ent Service Center.
ROTAX®
Distributors
For ROTAX® Authorized Distributors for aircraft engines see latest Operators Manual or
the official website www.FLYROTAX.com.
Engine serial
number
When making inquiries or ordering parts, always indicate the engine serial number. Due to
continuous product improvement, engines of the same engine type might require different
support and spare parts. The engine number is on the ignition cover, on the left, opposite
the electric starter.
Figure 1.1: Engine serial number
1
Engine serial number
00–00–00
Page 2
January 01 2020
Effectivity: 912 Series
Rev. 0

BRP ROTAX 912 Series Specifications

General

Brand	BRP
Model	ROTAX 912 Series
Category	Engine
Language	English