BRP ROTAX 912 Series - Leak Tests

BRP-Rotax
MAINTENANCE MANUAL LINE
Figure 7.23: Checking the carburetor actuation
1 Connection for throttle valve 2 Connection for throttle valve
3
Return spring
LEAK TESTS
General note
ATTENTION
Avoid over-tightening the fasteners. Use a suitable torque wrench for all work.
Instruction To check the following steps are necessary:
Step
Procedure
1
Inspect all fuel lines, their connections and unions.
2
Inspect the fuel lines for sign of chafing.
Effectivity: 912 Series
Rev. 0
12–20–00
Page 39
January 01 2020