BRP ROTAX 912 Series User Manual

BRP-Rotax
MAINTENANCE MANUAL LINE
TIME LIMIT FOR PARTS
General note
ATTENTION
This time limit must be followed independently and in addition to the visual in-
spections (see Chapter 05-20-00 section: Visual Inspection) of the respective
components.
Time limit The following components and systems must be replaced every 5 years:
• Venting hose of the carburetors
• Diaphragm on both carburetors
• Carburetor sockets
• All rubber hoses of the cooling system
• All rubber hoses of the fuel system
See SI-912-022, latest issue.
• All rubber hoses of the lubrication system which are part of the engine supply volume
and if they are not in the maintenance schedule of aircraft manufacturer
• Connecting hose of the air intake system
• Venting hose of the fuel pump
• V-belt
TIME LIMIT FOR FUEL PUMP
General note The fuel pump must be replaced every 5 years.
TIME LIMIT FOR THE COOLANT
General note Coolant must be replaced as per manufacturers instructions, at the latest during overhaul
or when the engine is replaced.
ANNUAL INSPECTION
General note A 100 hr. inspection is to be carried out periodically after every 100 hours of operation or
every 12 months, whichever comes first.
See Chapter 05-20-00 section Scheduled maintenance checks.
Effectivity: 912 Series
Rev. 0
05–10–00
Page 7
January 01 2020

BRP ROTAX 912 Series Specifications

General

Brand	BRP
Model	ROTAX 912 Series
Category	Engine
Language	English