BRUEL & KJAER PULSE 3560-C - Page 126

PULSE Multi-analyzer System Type 3560-B/C/D/E – Installation and IDAe Hardware118
Spurious-free
Dynamic Range
(dB) re full scale
input
(input terminated by
50 Ω or less)
Input Range Typical Typical
7.071 mV 110dB
160 dB
22.36 mV 110 dB
70.71 mV 120 dB
223.6 mV 130 dB
707.1 mV 130 dB
2.236 V 130 dB
7.071 V 130 dB
12 V 130 dB
DC Offset re full scale Guaranteed Typical Guaranteed Typical
<–60 dB –80 dB <–60 dB –80 dB
Harmonic Distortion (all harmonics) Guaranteed Typical
Guaranteed Typical
All Ranges
–80dB –100dB @ 1kHz –80dB –100dB @ 1kHz
Crosstalk
Between any two channels of a module
or between any two channels in different
modules
Frequency
Range
Guaranteed Typical
Frequency
Range
Guaranteed Typical
0 – 25.6 kHz –100 dB –140 dB 0 – 25.6 kHz –100 dB –140 dB
Channel-to-Channel Match
(same input range)
Guaranteed Typical Guaranteed Typical
Maximum Gain Difference
f
L
is the −0.1 dB frequency
of the high-pass filter
0.2 dB from lower
frequency limit, f
L
,
to upper limit, f
U
±0.01dB
0.1 dB from lower
frequency limit, f
L
,
to upper limit, f
U
±0.01dB
Maximum Phase Difference
(within one frame)
f
L
is the −0.1 dB frequency
of the high-pass filter
1.2° – 0.1° × (f/f
L
) from f
L
to 10 × f
L
(not valid for DC setting);
0.2° from 10 × f
L
to 1280 Hz
(valid for DC setting);
0.1° + 0.1° × (f/1280)
from 1280 Hz to 25.6kHz
1.2° – 0.1° × (f/f
L
) from f
L
to 10 × f
L
(not valid for DC setting)
0.2° from 10 × f
L
to 6.4 kHz
(valid for DC setting)
0.2° × (f/6400)
from 6.4 kHz to 25.6kHz
Channel-to-Channel Match
(any input range)
Guaranteed Typical
–
Maximum Gain Difference
0.2 dB from lower
frequency limit, f
L
,
to upper limit, f
U
±0.01dB
Maximum Phase Difference
(within one frame)
1.2° – 0.1° × (f/f
L
) from f
L
to 10 × f
L
(not valid for DC setting);
0.2° from 10 × f
L
to 640 Hz
(valid for DC setting);
0.1° + 0.1° × (f/640)
from 640 Hz to 6.4 kHz
Specifications – Input Channels, Standard 24-bit and Dyn-X (Continued)
Standard 24-bit
7537/37-A/39/39-A
3038/38-B/39/39-B
3560-B-010/020/030/040
Dyn-X
7538/38-A/40/40-A
3040/40-B/41/41-B
3560-B-110/120/130/140