PULSE Multi-analyzer System Type 3560-B/C/D/E – Installation and IDAe Hardware110
You can combine a range of services in one agreement running over several years. You get
priority at the time you need service. Examples of what a Service Agreement for PULSE
can contain are:
• Hardware maintenance
• Multiple calibrations – to give the most favourable price
• Priority calibration
• Priority repair
• Extension of manufacturer’s warranty
10.2.2 Accredited Calibration
For PULSE modules, you can choose between the internationally accepted DANAK accredi-
tation or A2LA, preferred by many North-American companies. The accredited certificate
for PULSE modules contains measured instrument data.
10.2.3 Traceable Calibration
With a traceable calibration at Brüel & Kjær your instruments will be calibrated to the same
level and under the same quality requirements as for accredited calibration.
10.2.4 Laboratory at Brüel & Kjær
Your instrument will be calibrated in a laboratory that has been inspected in depth by an
official authority. Methodology, procedures, traceability, technical competence and record
keeping have all been certified.
The certificate can be used across borders because the calibration has been carried out in
accordance with internationally accepted standards (ISO 17025).
This applies to both accredited and traceable calibration.
10.3 Available Calibration for PULSE Modules
Calibrations available for PULSE Front-Ends, Input/Output Modules, Generators and Con-
troller Modules:
• Initial Accredited calibration
• Initial traceable calibration
• Accredited re-calibration
• Traceable re-calibration
10.3.1 Initial Calibration
To start the measurement history from day one – if this is required, for example, for custom-
er audit or quality procedures – you can order accredited or traceable calibration with most
new instruments including PULSE.
To Next Page
Loading...
Need help?
General
