BRUEL & KJAER PULSE 3560-C - Page 136

PULSE Multi-analyzer System Type 3560-B/C/D/E – Installation and IDAe Hardware128
Crosstalk
between generator
output and any
channel on any
module
Guaranteed Guaranteed Typical
0 – 2 kHz –100 dB –
2 kHz – 25.6 kHz –85 dB –
0 – 102.4 kHz –
–120 or better than
–90 dB re max.
input voltage
whichever is greater
(worse)
–150 dB
Common Mode Rejection Guaranteed Guaranteed Typical
1 Hz – 1 kHz 50 dB 50 dB 50 dB
1kHz – 25.6kHz 40dB 24dB 30dB
25.6 kHz –
102.4 kHz
– 10dB 20dB
Max. Common Mode Voltage 1V
peak
, DC – 4 MHz
10 V
peak
, 4 MHz – 80 MHz
5V
peak
, DC – 80 MHz
Reconstruction Filter Type Seventh order Butterworth Sixth order Butterworth
Attenuation of mirror
frequencies
>80dB
Monitor Output Connectors
None
2 × BNC
Output Level
2.236 V
p
for full scale input in any range,
±0.05dB
Output Impedance 50 Ω
Harmonic Distortion 0 – 25.6 kHz: < –90 dB
25.6 kHz – 102.4 kHz: < –80 dB
DC Offset (Max.) Input Range DC Offset (Max.)
7.071 mV 150 mV
22.36 mV 50 mV
70.71 mV 15 mV
223.6 mV 5 mV
707.1 mV 1.5 mV
2.236 V 0.5 mV
7.071 V 0.5 mV
22.36 V 0.5 mV
Signal Output From last amplifier before anti-aliasing
filter, but after analog high-pass filters
Specifications – Output Channels, Types 3109 and 3110 (Continued)
3109 3110