Bruker BVT3000 - 1.7.7 BVTB 3500 connector

18 (67) BRUKER BVT3000 Version 003
Description
BVTB 3500 connector 1.7.7
Figure 1.11.
BVTB 3500 connector (Front view)
Table 1.8. BVTB 3500 connector pin assignment
The BVTB3500 is a power booster for the BVT3000.
PIN SIGNAL NAME DIRECTION COMMENT
A +5V O digital vcc output
C NC --- reserved
E gnd_BTO O BTO2000 has an isolated supply GND
G +15 v_BTO O BTO2000 has an isolated supply +15V
J NC --- reserved
L dgnd O digital ground
M sda I/O I2C bus data line
N scl I/O I2C bus clock line
O power control O 0 to 10 volt power control output
P pgnd O power ground
R pgnd O power ground
S thermocouple I safety thermocouple input
T b_relay O BVTB 3500 heater relay command
U b_connected I if grounded BVTB 3500 is detected
J
E
C
E
O
N
MU
L
G
PR
S
T