52 (67) BRUKER BVT3000 Version 003
Technical specifications
•
LN
2
evaporator with 200 W heater.
Security fuses 5.2
Some important electronic functions are fuse protected. To replace a blown fuse,
turn off the BVT3000 and disconnect the main power cord. A faulty fuse must
always be replaced with the same type.
Table 5.1. Fuses values
Fuses Value Protection for
F1 1AT +5Vdigital
F2 6,3 AT Heater resistor
F3 0,5 AT +15 V analog
F4 0,5 AT -15V analog
F5 0,5 AT +24V valve block
F6 0,5 AT + 15 V BTO2000
To Next Page
Loading...
