Bruker BVT3000 - 4.8.12 WB (Write BBIS)

48 (67) BRUKER BVT3000 Version 003
Remote interface control
WB (Write BBIS) 4.8.12
Write
Syntax: EOT0000STXWBadr_e2prom A1 A0 D1 D0 ETX BCC
Response
: ACK if command issues
NACK in all other cases
Description
: WBcommandallowsasinglebytetobewrittenonaBBIS
E2PROM
Rules
: A1, A0 are values from '0' up to 'F' representing the address in the
E2PROM.
D1, D0 are values from '0' up to 'F' representing the value to be written.
adr_e2prom is a value from '0' up to '7' representing the I2C bus address of
the E2PROM
- 0: Address unused
- 1: BVT3X00 motherboard address
- 2: BOOSTER address
- 3: Address unused
- 4: Address unused
- 5: Address unused
- 6: Address unused
- 7: Address unused
All other values generate a NACK response