Bruker BVT3000 - Technical specifications; 5.1 Specifications

BVT3000 Version 003 BRUKER 51 (67)
5
Technical
specifications 5
Specifications 5.1
Weight :
• 14 Kg for basic version without any options.
Dimensions :
• 445 / 484 mm wide (Body / Front panel)
• 130 mm high
• 461 mm deep
Voltage requirements :
• 220 V + / - 10%, 50/60 Hz
Power consumption :
• 250 VA maximum for standard version.
Inputs:
• Thermocouple type T with standard linearisation.
• Pt100
• BTO2000
Temperature stability
:
• +/- 0.2 °C target temperature = room temperature +5 °C to 200 °C with T ther-
mocouple.( Room temperature must not change by more than +/- 1°C ).
• +/- 0.01 °C target temperature = room temperature +5 °C to 50°C with
BTO2000.( Room temperature must not change by more than +/- 1°C ).
Heater power :
• 192 W (48 V max. on 12 ohm probe heater with heater cable )
Gas inlet :
• 4 bars mini, 8 bars maxi (dry air or N
2
gas).
Gas flow rate
:
• 200 l/h to 2000 l/h with 15 steps
Options
For regulation at low temperature following devices can be used:
• BCU05
• LN
2
exchanger