8.8 Safety water sensor
Order number: 1757
Requirement
– Installation of the safety water sensors is carried
out exclusively by the manufacturer.
– Safety collecting basin
The safety water sensor is placed below the device in the safety
collecting basin and reacts in the event of water leakage from the
device. The humidifier immediately stops working and the user is
alerted of the water leakage by a signal tone and an error display
(03). As soon as the leaked water is removed, the humidifier starts
again automatically.
8.9 External water sensor
Order number: 1753
Requirement
– Automatic water supply
– Safety collecting basin
Fig. 77: Safety water sensor
Accessories
Evaporation Humidifier B500 Professional 73
To Next Page
Loading...
