BST ekr CON 600 net User Manual

6
Commissioning
20/47 ekr CON 600, ekr CON 600 net – Master-Slave Guiding with Sensor Positioner
The operator must ensure that suitable protective devices are
installed to prevent reaching into the positioning range of the
sensor slides.
WARNING
Danger of death from actuator movements!
During function tests, parts of your body may be crushed, cut or hit.
►
Before starting the commissioning work, make sure that no per-
sons are in the vicinity of the pivot / traversing area of machine
components that are positioned by the actuator (e.g. pivoting
frame guide, swiveling roller guide, rewind, unwind).
►
Cordon off the work area before starting the commissioning
work to prevent access by unauthorized persons.
►
Please also read and follow all safety instructions contained in
the installation and commissioning manual for the ekr CON 600,
ekr CON 600 net controller (document number MD.541) and in
the operating manual for the FVG POS 100 sensor positioner
(document number MD.476).
6.2 Requirements
■ The web guiding system has been fully wired up, i.e. the cable
connections between the separate web guiding components
(controller, sensors, actuator) have been made (see Wiring Dia-
grams, page 14).
■ The controller is connected to the power supply.
■ All transport locking devices on the guiding device and actuator
have been removed.

BST ekr CON 600 net Specifications

General

Brand	BST
Model	ekr CON 600 net
Category	Controller
Language	English