BST ekr CON 600 net User Manual

2
About Safety
8/47 ekr CON 600, ekr CON 600 net – Master-Slave Guiding with Sensor Positioner
2 About Safety
Please refer to the operating manual for the ekr CON 600, ekr CON
600 net web guiding controller (document number MD.542).
2.1 Intended Use
The special function Master-Slave Guiding with Sensor Positioner
of the ekr CON 600, ekr CON 600 net web guiding controller is only
determined for web guiding. It is used when two webs of material
have to be guided together precisely to the web edge or web
center-line.
The function may only be used observing the operating manual
for the ekr CON 600, ekr CON 600 net web guiding controller.
All information regarding safety as well as intended and non-
intended use listed there, also apply for the special function
Master-Slave Guiding with Sensor Positioner.
2.2 Non-intended Use
For this web guiding system the same use is non-intended that is
described in the operating manual for the ekr CON 600, ekr CON
600 net controller.
2.3 Safety Instructions
Every user must read and follow the safety instructions in this
manual and in the operating manual for the ekr CON 600, ekr CON
600 net web guiding controller before working with or on the
system.

BST ekr CON 600 net Specifications

General

Brand	BST
Model	ekr CON 600 net
Category	Controller
Language	English