SM-DIN/MTC Board Firmware Upgrade
SMART MATRIX MTC 2 - 24
SM-DIN/MTC Board
Firmware Upgrade
This function allows you to upgrade the firmware of SM-DIN/MTC Boards.
Enter the SETUP menu.
Select SERVICE.
Select BOARDS UPG.
Select the range of SM-DIN/MTC Boards on which you
want to upgrade the FIRMWARE (default: All)
To continue.
UPGRADE to start the upgrading .
Automatic upgrading in progress.
The display of Boards currently being upgraded will show
SETUP
→
SERVICE
→
BOARDS UPG
To Next Page
Loading...
