Speed Loading
SMART MATRIX MTC 2 - 42
Speed Loading (option)
This function allows you to load, to the IS3W sensors, one of the speeds available in the database, or to
unload the speed currently loaded in the sensors.
All the connected devices can be configured with the same parameters or, (to increase the system flexibility)
you may create multiple device groups, up to a maximum of 10 groups, configuring each group with different
parameters.
Speed Loading
Select the SPEED LOAD menu item.
Once you have activated the SPEED LOAD function
from main menu, choose the speed you want to load
(e.g.. MTC-1) and press LOAD.
Select the range of devices to be loaded with the
speed (default: all).
LOAD to load the speed.
“LOAD DAC STYLE” appears for a few seconds and
then the display turns back to the SPEED LOAD
menu, with the new speed loaded
If different speeds have been loaded to different
devices, the diskette symbol (speed loaded
indication) appears for 2 or more speeds.
If on the same device two different speeds are
loaded, the warning “STYLE OVERLAP
CONTINUE?” appears.
SPEED LOAD
To Next Page
Loading...
