Speed Programming
SMART MATRIX MTC 2 - 41
Type the Name you want to assign to the
modified speed.
To save the new speed.
If you change the speed currently loaded on specific DAC devices (indicated by the diskette symbol)
the changes will be automatically loaded on the relevant DAC devices.
Speed Clearing
This function allows you to remove a speed from the database.
Once you have activated the SPEED EDIT
function from main menu, choose the style you
want to remove (e.g.. MTC-4)
Press CLR button
Confirm the operation.
MTC-4 will be removed from the database.
The speed currently loaded on sensors cannot be erased !
If you try to erase it, then a warning message “CAN’T ERASE LOADED STYLE!” will appear
To Next Page
Loading...
