Comunication Test
SMART MATRIX MTC 2 - 19
Communication Test
This function allows you to check:
- The efficiency level of communications between SMART MATRIX and SM-DIN Boards and between SM-
DIN Boards and Sensors.
- The correct operation of Sensors.
- The correct operation of DACS (option).
Communication Efficiency
Enter the SETUP menu.
Select TEST COM.
Select COMM. EFF. to check the efficiency level of
communications.
Select GLOBAL (global efficiency) or SINGLE
(communication efficiency with each sensor).
Number of sensors on which communication errors
occurred (DEV IN ERROR) and total number of
transmission repeated as result of detected errors (TOTAL
RETRY). A maximum of 5 transmission are repeated for
each sensor.
Global efficiency index.
Like for GLOBAL option, but referred to the selected Board
only. (e.g.: BOARD NUMBER:1)
Efficiency index of Board 1.
SETUP
→
TEST COM
SETUP
→
TEST COM
→
COMM. EFF.
To Next Page
Loading...
