Buchi ProxiMate - Status Bar Information

6 | Operation BÜCHI Labortechnik AG
38/94 Operation Manual ProxiMate™
Action Option Explanation
[License Request] Procedure See Chapter5.6.1 "Apply for a li-
cence", page23
(administrator only)
[Remote host] Open program The Software TeamViewer opens
for remote support.
(administrator only)
[Cleaning Mode] Procedure See Chapter7.7 "Cleaning the dis-
play", page85
(all users)
[Operational Coun-
ters]
View / Procedure The data is displayed depends on
the system configuration:
Total Operation time / NIR Operation
Time / Lamp UP View / Reference
Up View / System Temperature / Ro-
tation Time / VIS Operation Time /
Lamp Down View / References
Down View / System Humidity
(administrator only)
[Extended System
Test History]
View Shows a dialog with a further infor-
mation about the tests carried out.
(administrator only)
[Calibrate BCV] Procedure See Chapter5.6.3 "Calibrating a
Baseline Correction Vector (BCV)",
page24
(administrator only)
[Import External
Reference Data]
Procedure See Chapter5.6.4 "Import external
reference data", page25
[Licence Import] Procedure See Chapter5.6.2 "Import Licence",
page24
(administrator only)
6.4 Status bar
The status bar shows the status of the instrument.
The following statuses are possible:
Indications on the status bar
View Status
Stabilizing Spectrometer Shows the remaining time.
Ready to Measure The instruments is ready to measure.
Tempering to The instrument is warming up.
The Status bar shows the target and current in-
strument temperature.
Configuring… The instrument is starting up.
The instrument is loading an application.
Measuring... The instrument is carrying out a measurement.
Adjusting Exposure Time… Instrument initialization