Buchi ProxiMate - Exporting and Importing Application Data

BÜCHI Labortechnik AG Operation | 6
Operation Manual ProxiMate™ 67/94
Precondition:
R The instrument is in administrator mode. See Chapter6.5 "Log in administrator
mode", page39
u Navigate to the [History] menu via the navigation path.
u Tap the function [Edit] on the function bar.
ð The display highlights the function [Edit] in green.
u Tap the name of the measurement that you wish to use.
u Tap the button [Add to calibration dataset ].
ð The measurement is activated for AutoCal.
6.11 Exporting application data
This export function allows the use of (unlicenced) applications onto another instru-
ment.
NOTE
The location of the destination folder is fixed. See Chapter10.2 "Folder locations",
page89
Navigation path
➔
Precondition:
R The instrument is in administrator mode. See Chapter6.5 "Log in administrator
mode", page39
u Navigate to the [Application] menu via the navigation path.
u Tap the application you wish to export.
ð The display highlights the application in green.
u Tap the function [Export] on the function bar.
ð The display shows a dialog with the properties of the application you wish to
export. All properties are highlighted in green.
u Tap the properties you do not want to export.
ð The disabled properties are highlighted in white.
u Tap the button [OK].
ð The dialog box closes.
ð The application is exported.
6.12 Importing application data
Navigation path
➔
Precondition:
R The instrument is in administrator mode. See Chapter6.5 "Log in administrator
mode", page39
u Navigate to the [Application] menu via the navigation path.
u Tap the function [Import] on the function bar.
ð The display shows a dialog for choosing the folders on the instrument.
u Navigate to the saving folder of the application you wish to import.