Buchi ProxiMate - Enter a Description for an Application; Changing the Rotation of an Application

6 | Operation BÜCHI Labortechnik AG
44/94 Operation Manual ProxiMate™
Navigation path
➔
Precondition:
R The instrument is in administrator mode. See Chapter6.5 "Log in administrator
mode", page39
u Navigate to the [Application] menu via the navigation path.
u Tap the function [Edit] on the function bar.
ð The display highlights the function [Edit] in green.
u Tap the name of the application that you wish to edit.
ð The display highlights the application in green.
u Tap the action [Sample presentation].
ð The display shows a dialog box with the selectable values.
u Select a value.
u Tap the button [OK].
ð The dialog box closes.
ð The setting is saved.
6.6.7 Enter a description for an application
Proceedings:
Navigation path
➔
Precondition:
R The instrument is in administrator mode. See Chapter6.5 "Log in administrator
mode", page39
u Navigate to the [Application] menu via the navigation path.
u Tap the function [Edit] on the function bar.
ð The display highlights the function [Edit] in green.
u Tap the name of the application that you wish to edit.
ð The display highlights the application in green.
u Tap the action [Description].
ð The display shows a dialog with an alphanumeric input box.
u Enter a description for the application.
u Tap the button [OK].
ð The dialog box closes.
ð The description is saved.
6.6.8 Changing the Rotation of an application
The Application has the option to select whether the sample is rotated during mea-
surement.
The following settings are available:
Mode Explanation
Yes The sample carrier rotates during the measurement.
No The sample carrier does not rotate during the measurement.