Buchi ProxiMate - Setting a Reference Value to a Property; Activating a Measurement for Autocal

6 | Operation BÜCHI Labortechnik AG
66/94 Operation Manual ProxiMate™
1
2
5
6
3
4
7
8
Fig.18: Dialog AutoCal
1 Name of statistic parameters 2 Values of statistic parameters of ac-
tual calibration
3 Values of statistic parameters of new
calibration
4 IDs of last n (default = five) measure-
ments
5 Parameter values according to actual
calibration
6 Parameter values as predicted by
new calibration
7 Button [Accept] 8 Button [Reject]
u Check the data.
u Press the button [Accept].
6.10.2 Setting a reference value to a property
Navigation path
➔
Precondition:
R The instrument is in administrator mode. See Chapter6.5 "Log in administrator
mode", page39
u Navigate to the [History] menu via the navigation path.
u Tap the function [Edit] on the function bar.
ð The display highlights the function [Edit] in green.
u Tap the name of the measurement that you wish to edit.
u Tap the property you wish to edit.
ð The display shows a dialog box with a numeric input box.
u Enter the reference value.
u Tap the button [OK].
ð The reference value is set.
6.10.3 Activating a measurement for AutoCal
Navigation path
➔