Buchi ProxiMate - Changing the Unit of a Property; Changing the Bias of a Property

6 | Operation BÜCHI Labortechnik AG
60/94 Operation Manual ProxiMate™
u Tap the button [OK].
ð The dialog box closes.
ð The value for the Decimal places is saved.
6.8.16 Changing the Unit of a property
NOTE
Special characters
4 Tab the button [Shift] on the alphanumeric input box.
ð The alphanumeric input box shows the available special characters.
Navigation path
➔
Precondition:
R The instrument is in administrator mode. See Chapter6.5 "Log in administrator
mode", page39
u Navigate to the [Application] menu via the navigation path.
u Tap the function [Edit] on the function bar.
ð The display highlights the function [Edit] in green.
u Tap the name of the application that you wish to edit.
ð The display highlights the application in green.
u Tap the name of the property that you wish to edit.
ð The display shows the view Property.
u Tap the action [Unit].
ð The display shows a dialog with an alphanumeric input box.
u Enter a unit for the property.
u Tap the button [OK].
ð The dialog box closes.
ð The Unit is saved.
6.8.17 Changing the Bias of a property
A bias is a constant value.
This value is added to the result of a prediction to correct a constant deviation be-
tween predicted values and reference values.
Proceedings:
Navigation path
➔
Precondition:
R The instrument is in administrator mode. See Chapter6.5 "Log in administrator
mode", page39
u Navigate to the [Application] menu via the navigation path.
u Tap the function [Edit] on the function bar.
ð The display highlights the function [Edit] in green.