Buchi ProxiMate - Editing Instrument Applications

6 | Operation BÜCHI Labortechnik AG
40/94 Operation Manual ProxiMate™
u Tap the button [OK].
ð The dialog box closes.
ð The instrument is in administrator mode.
ð The status bar shows the icon administrator.
6.6 Editing an application
NOTE
Applications can only be edited in Administrator mode.
6.6.1 Creating a new application
There are two ways to create an application:
 by copying an existing application
See Chapter "Creating a new application by copying an existing application",
page40
 by creating a new application
See Chapter "Creating a new application", page40
Creating a new application
Proceedings:
Navigation path
➔
Precondition:
R The instrument is in administrator mode. See Chapter6.5 "Log in administrator
mode", page39
u Navigate to the [Application] menu via the navigation path.
u Tap the function [Edit] on the function bar.
ð The display highlights the function [Edit] in green.
u Tap the function [Add] on the function bar.
ð The display shows a dialog with an alphanumeric input box.
u Enter a name for the application.
u Tap the button [OK].
ð The dialog box closes.
ð The new application is created.
Creating a new application by copying an existing application
Proceedings:
Navigation path
➔
Precondition:
R The instrument is in administrator mode. See Chapter6.5 "Log in administrator
mode", page39
u Navigate to the [Application] menu via the navigation path.