Buchi ProxiMate - Changing the Selection Ability of an Application

6 | Operation BÜCHI Labortechnik AG
46/94 Operation Manual ProxiMate™
Proceedings:
Navigation path
➔
Precondition:
R The instrument is in administrator mode. See Chapter6.5 "Log in administrator
mode", page39
u Navigate to the [Application] menu via the navigation path.
u Tap the function [Edit] on the function bar.
ð The display highlights the function [Edit] in green.
u Tap the name of the application that you wish to edit.
ð The display highlights the application in green.
u Tap the action [SOP].
ð The display shows a dialog with an alphanumeric input box.
u Enter the steps which the operator has to carry for the application.
u Tap the button [OK].
ð The dialog box closes.
ð The description is saved.
6.6.11 Changing the selection ability of an application
Change whether an Application can be selected by the user during operation.
The following modes are available:
Mode Explanation
Yes The application is selectable.
No The application is not selectable.
Proceedings:
Navigation path
➔
Precondition:
R The instrument is in administrator mode. See Chapter6.5 "Log in administrator
mode", page39
u Navigate to the [Application] menu via the navigation path.
u Tap the function [Edit] on the function bar.
ð The display highlights the function [Edit] in green.
u Tap the name of the application that you wish to edit.
ð The display highlights the application in green.
u Tap the action [Selectable].
ð The display shows a dialog box with the selectable values.
u Select a value.