Buchi ProxiMate - Logging into Administrator Mode

BÜCHI Labortechnik AG Operation | 6
Operation Manual ProxiMate™ 39/94
View Status
Calibrating BCV… The instrument calibrates the Baseline Correction
Vector.
Initializing… Instrument initialization
Measuring Dark Reference… The instrument measures the internal dark refer-
ence.
Error An error occurred.
See Chapter8 "Help with faults", page86
Extended System Tests The action Extended System Test is activated. In-
strument waits for action.
Preconditioning… Instrument initialization
Standard System Test Run-
ning…
The instrument carries out a Standard System
Test.
System Testing… Instrument running internal tests
Ready for Configuration  No application selected.
 No Baseline Correction for Sample Presenta-
tion of current application defined.
Measuring White Reference... Instrument initialization
Lamp Pre-Heating The instrument is heating the lamp. The Status
bar shows the remaining time.
Symbols on the status bar
Symbol Status
The current user is logged on as administrator
The instrument is in administrator mode.
The current user is logged on as operator.
The instrument is in operator mode.
A warning has occurred check the [NIRWise log].
See Chapter6.3.4 "Tools menu", page36
6.5 Log in administrator mode
Navigation path
➔
Precondition:
R The instrument is in operator mode.
u Navigate to the [Tools] menu via the navigation path.
u Tap the function [Login] in the function bar.
ð The display shows a dialog box with the available Users.
u Tap [Administrator].
ð The display shows a dialog with an alphanumeric input box.
u Enter the password.