Buchi ProxiMate - Changing the Name of an Application; Changing the Alias of an Application

BÜCHI Labortechnik AG Operation | 6
Operation Manual ProxiMate™ 41/94
u Tap the function [Edit] on the function bar.
ð The display highlights the function [Edit] in green.
u Tap the application you wish to copy.
ð The display highlights the application in green.
u Tap the function [Copy] on the function bar.
ð The display shows a dialog with an alphanumeric input box.
u Enter a name for the application.
u Tap the button [OK].
ð The display shows a dialog with the properties of the copied application high-
lighted in green.
u Tap the properties you do not want to copy.
ð The disabled properties are highlighted in white.
u Tap the button [OK].
ð The dialog box closes.
ð The new application is created.
6.6.2 Changing the name of an application
NOTE
It is not possible to rename an application after it has been used once.
Proceedings:
Navigation path
➔
Precondition:
R The instrument is in administrator mode. See Chapter6.5 "Log in administrator
mode", page39
u Navigate to the [Application] menu via the navigation path.
u Tap the function [Edit] on the function bar.
ð The display highlights the function [Edit] in green.
u Tap the name of the application that you wish to edit.
ð The display highlights the application in green.
u Tap the action [Name].
ð The display shows a dialog with an alphanumeric input box.
u Enter a name for the new application.
u Tap the button [OK].
ð The dialog box closes.
ð The new name is saved.
6.6.3 Changing the alias of an application
The alias function allows to give a previously defined application a local name.
Proceedings:
Navigation path
➔