Buchi ProxiMate - Changing the Target of a Property; Changing the Limit Maximum of a Property

6 | Operation BÜCHI Labortechnik AG
62/94 Operation Manual ProxiMate™
u Navigate to the [Application] menu via the navigation path.
u Tap the function [Edit] on the function bar.
ð The display highlights the function [Edit] in green.
u Tap the name of the application that you wish to edit.
ð The display highlights the application in green.
u Tap the name of the property that you wish to edit.
ð The display shows the view Property.
u Tap the action [Mahalanobis].
ð The control panel shows a dialog box with a numeric input box.
u Enter the value in the numeric input box.
u Tap the button [OK].
ð The dialog box closes.
ð The value for the Mahalanobis is saved.
6.8.20 Changing the Target of a property
Sets the target value, relative to which the tolerances are considered.
Proceedings:
Navigation path
➔
Precondition:
R The instrument is in administrator mode. See Chapter6.5 "Log in administrator
mode", page39
u Navigate to the [Application] menu via the navigation path.
u Tap the function [Edit] on the function bar.
ð The display highlights the function [Edit] in green.
u Tap the name of the application that you wish to edit.
ð The display highlights the application in green.
u Tap the name of the property that you wish to edit.
ð The display shows the view Property.
u Tap the action [Target].
ð The control panel shows a dialog box with a numeric input box.
u Enter the value in the numeric input box.
u Tap the button [OK].
ð The dialog box closes.
ð The value for the Target is saved.
6.8.21 Changing the Limit maximum of a property
Sets the upper limit for the property.
Proceedings:
Navigation path
➔