BÜCHI Labortechnik AG Help with faults | 8
Operation Manual ProxiMate™ 87/94
Error code Error message Solution
1008 Adjusting the IWR level failed for
view '{0}' (NirTargetSaturation =
{1}, NirTargetExposureTime =
{2} µs).
u Check operation of source
lamp.
u Contact BUCHI Costumer
Service.
1009 The Peltier temperature ({0} °C)
is out of the expected range
({1}..{2} °C).
u Contact BUCHI Costumer
Service.
1010 The device did not respond
within given timeout of {0} ms for
command '{1}'.
u Restart the instrument.
u Contact BUCHI Costumer
Service.
1011 The internal white reference sig-
nal is not valid. For more details
see log files.
u Restart the instrument.
u Contact BUCHI Costumer
Service.
1500 Unknown error occurred while
generating report '{0}': {1}
u Restart the instrument.
u Reattempt creating a report.
u Contact BUCHI Costumer
Service.
1501 Unknown error occurred while
exporting report '{0}': {1}
u Restart the instrument.
u Reattempt exporting a report.
u Contact BUCHI Costumer
Service.
2500 Failed to create NIRWise data
backup. Error: '{0}'.
u Restart the instrument.
u Reattempt data backup.
u Contact BUCHI Costumer
Service.
2502 A critical error occured during
test run. Test run has been can-
celed. For more details see log
file.
u Restart the instrument.
u Reattempt test.
u Contact BUCHI Costumer
Service.
To Next Page
Loading...
