Information about the product
2
RC35 programming unit - Technical specifications are subject to change without prior notice.
6
2 Information about the product
2.1 Correct use
The RC35 programming unit must only be used to operate and control Buderus heating
systems in residential buildings.
The boiler must be equipped with EMS (energy management system) or UBA1.x (univer-
sal burner control).
The programming unit must not be used in conjunction with Logamatic 2000/4000 con-
trol panels.
We recommend that the heating system is always operated with a programming unit (only
emergency operation is possible without a programming unit).
If RC20 remote control units manufactured before 2006 are being used, only two remote
control units can be connected. If you have any questions about this, please contact your
local Buderus office.
2.2 EU Declaration of Conformity
2.3 Included in delivery
– RC35 programming unit
– Operating instructions
– Installation and servicing instructions
– Wall bracket, mounting materials
The design and operation of this product conforms to European Directives
and the supplementary national requirements. Its conformity is confirmed by
the CE marking. You can view the Declaration of Conformity on the internet
at www.buderus.de/konfo or request a copy from your local Buderus office.